How to Reset Maintenance Light On toyota Camry

This time I will certainly offer a guide about "How to Reset Maintenance Light On toyota Camry" for it please review the article listed below.


How to Reset Maintenance Light On toyota Camry


How you can reset upkeep required light on 2004-2015 Toyota Camry:

2007-2015

-With automobile ignition switched to ON placement, ensure odometer is showing "Tripmeter A", then transform the ignition button to OFF setting
-Press and also hold the JOURNEY reset or SETTING button
-While holding reset button, switch ignition to ON placement

** w/ ENGINE START/STOP switch, maintain your foot off brake pedal and also push ENGINE START/STOP switch twice to get Key On/ Engine Off setting

-Continue to hold the reset button until the odometer displays "000000" and after that the original worth is displayed

-Turn the automobile off and back on to validate reset was approved

2010-2015

-On the navigation screen, press CONFIGURATION
-After that press CAR, after that MAINTENANCE
-Touch the wanted thing in which you should reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.).
-From here, fill in the asked for fields with the brand-new "Next Solution" period (i.e. date and distance till following service is due).
-Press OK when total.
-Repeat steps 3-5 for any other solutions that were executed.

2004-2006

-With lorry ignition switched to ON placement, ensure odometer reading is shown, after that turn the ignition button to OFF position.
-While holding reset switch, switch ignition to ON setting.

** w/ ENGINE START/STOP switch, keep your foot off brake pedal and also press ENGINE START/STOP button twice to obtain Key On/ Engine Off setting.

-Continuously hold the reset switch up until the odometer shows "000000" and/or the MAINT REQD light goes off.
-Turn the automobile off and also back on confirm reset was approved.

2004-2009

-On the navigating screen, press DETAILS or SETUP.
-After that touch MAINTENANCE.
-Touch the preferred item in which you should reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.).
-From here, fill in the asked for fields with the brand-new "Next Service" period (i.e. day following solution due and/or range till next solution is due).
-Press OK when full.
-Repeat actions 3-5 for other solutions that were done.

We hope you find these reset procedures practical.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel