Toyota Camry Maintenance Light

This moment I will offer a guide concerning "Toyota Camry Maintenance Light" for it please read the write-up listed below.


Toyota Camry Maintenance Light


How to reset upkeep needed light on 2004-2015 Toyota Camry:

2007-2015

-With car ignition changed to ON setting, ensure odometer is showing "Tripmeter A", then turn the ignition switch to OFF setting
-Press and also hold the JOURNEY reset or MODE switch
-While holding reset switch, button ignition to ON setting

** w/ ENGINE START/STOP switch, keep your foot off brake pedal and push ENGINE START/STOP switch two times to get Key On/ Engine Off setting

-Continue to hold the reset switch until the odometer presents "000000" and then the initial value is displayed

-Turn the car off as well as back on confirm reset was approved

2010-2015

-On the navigating display, press SETUP
-After that press LORRY, then UPKEEP
-Touch the desired product where you need to reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.).
-From here, fill in the asked for areas with the brand-new "Next Solution" interval (i.e. date and also distance till following solution schedules).
-Press OK when full.
-Repeat actions 3-5 for other solutions that were done.

2004-2006

-With automobile ignition switched over to ON setting, make sure odometer analysis is revealed, after that transform the ignition button to OFF placement.
-While holding reset button, switch ignition to ON placement.

** w/ ENGINE START/STOP button, keep your foot off brake pedal as well as push ENGINE START/STOP switch twice to obtain Key On/ Engine Off mode.

-Continuously hold the reset switch up until the odometer shows "000000" and/or the MAINT REQD light goes off.
-Transform the automobile off and back on to confirm reset was accepted.

2004-2009

-On the navigating screen, press INFO or SETUP.
-Then touch MAINTENANCE.
-Touch the desired thing in which you need to reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.).
-From here, fill in the asked for areas with the brand-new "Next Service" period (i.e. day following service due and/or distance till following service is due).
-Press OK when total.
-Repeat actions 3-5 for any other solutions that were performed.

We wish you discover these reset treatments handy.

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel